Hi there, I have wired some lights, they are working but not how they should and I was hoping someone could look over my design. Below is a picture I drew of the set up, I'll explain more and discuss the problem below.
![Image]()
Now the switch I am using is exactly like the one above.
Each light (2) have a dedicated switch. The problem is that yes the lights work but the switches work opposite, as in one switch turns the light on in the off position and the other does the opposite if you catch my drift.
There is no loop on the diagram because there is no ground wires.
Any help would be much appreciated.
Now the switch I am using is exactly like the one above.
Each light (2) have a dedicated switch. The problem is that yes the lights work but the switches work opposite, as in one switch turns the light on in the off position and the other does the opposite if you catch my drift.
There is no loop on the diagram because there is no ground wires.
Any help would be much appreciated.
