DIY Home Improvement Forum banner

Can Vinyl beadboard be painted?

1 reading
25K views 5 replies 4 participants last post by  gpm1976  
#1 ·
Looking at buying this for a bathroom and wondering if it can be painted?

Plastpro Veranda 8 ft. x 7-1/4 in. x 1/4 in. Vinyl Pre-finished Reversible Panel Planking Moulding

The product description says it can be painted, but then if you read the specs it says Paint/Stain: NO. So I'm not quite sure what to think.

So, can this be primed and painted? If so, what's the process and what will I need to use?


There's another PVC product from Lowes that says painter's grade beadboard, but it's 3 times the price.
 
#2 ·
Clean, light sanding, clean again, acrylic latex paint.
An enamel will give you a harder finish.
The higher the gloss the easier to clean.
I would hit the low spots in the beads, inside corners, close to any trim with a sash brush and roll the field with a foam roller.
 
#4 ·
Generally vinyl will hold paint well. Usually there is no need to prime. Joe's suggestion looks like a good plan to me. Just scuff it up, clean it well and use a good quality acrylic.

Although one of the good things about vinyl is that it doesn't have to be painted. Once you do paint it, you will have to maintain it. You would probably be better off if you could find a stock color that you like.