DIY Home Improvement Forum banner

Stuck shutoff valve

6.2K views 8 replies 5 participants last post by  Matt1963  
Also try some heat from a hair dryer or torch. Be careful with the torch, not to hot. Keep working at it.
 
I thought about using a torch but wasn't sure if it would mess anything up in the valve. Do you know if there is anything that can get damaged or ruined by using heat?
Correct. You can damage it with too much heat. Best to just use hairdryer.
 
  • Like
Reactions: Domo
You don't need too much heat. Just enough to warm it up a bit. Sometimes that's all you need.
 
  • Like
Reactions: Domo