I'm trying to figure out how to get the trim plate from popping off on my lockset if I bump it the wrong way it comes off. The lock has no visible screws. There's a slot in the handle I'm guessing to get the doorknob off. Once the knob is removed how do I tighten down the trim plate.
Loose commercial mortise style lockset trim plate
Dylman
I'm trying to figure out how to get the trim plate from popping off on my lockset if I bump it the wrong way it comes off. The lock has no visible screws. There's a slot in the handle I'm guessing to get the doorknob off. Once the knob is removed how do I tighten down the trim plate.
1 - 4 of 4 Posts
I'm trying to figure out how to get the trim plate from popping off on my lockset if I bump it the wrong way it comes off. The lock has no visible screws. There's a slot in the handle I'm guessing to get the doorknob off. Once the knob is removed how do I tighten down the trim plate.
Installing the SARGENT 7500 Interconnected Lock
We install the SARGENT 75G05 entrance double locking interconnected lock onto a mount.
www.locksmithledger.com
Removal is the reverse of installation.
Joined
·
4,979 Posts
I think you have a Schlage G series lock there. Loooooong discontinued and zero parts available. Do not remove anything but the knob and estucheon! Reinstalling inside mechanism is an almighty pain. First picture shows possible locations of the inside knob retainer (Orange and Red dots).
![Image]()
Second picture shows what you would see with the inside estucheon removed. The retainer for the inside estucheon is spring loaded and the spring may be broken. Third picture has a better view of the spring.
![Image]()
![Image]()
Let us know your resolution!
Second picture shows what you would see with the inside estucheon removed. The retainer for the inside estucheon is spring loaded and the spring may be broken. Third picture has a better view of the spring.
Let us know your resolution!
1 - 4 of 4 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
