Gents,
Thank you for all of your inputs. I have had no success trying to cross reference my GE motor, but have gotten the following information from the motor (from a Trane XE1000 AC Unit (circa '95)):
P/N: 5KCP39FG R251S
CPN: C140267P01
CL B INS CONT AIR OVER
THERMALLY PROTECTED
HZ = 60
PH = 1
RPM = 1075
HP = 1/5
V = 200-230
A = 1.5
Here is another number on it which I don't know is of any significance:
952690006323
There is a four (4) bolt mount on the back side. Not sure what the shaft diameter or length is.
Any help would be greatly appreciated.
Mark
Thank you for all of your inputs. I have had no success trying to cross reference my GE motor, but have gotten the following information from the motor (from a Trane XE1000 AC Unit (circa '95)):
P/N: 5KCP39FG R251S
CPN: C140267P01
CL B INS CONT AIR OVER
THERMALLY PROTECTED
HZ = 60
PH = 1
RPM = 1075
HP = 1/5
V = 200-230
A = 1.5
Here is another number on it which I don't know is of any significance:
952690006323
There is a four (4) bolt mount on the back side. Not sure what the shaft diameter or length is.
Any help would be greatly appreciated.
Mark
