DIY Home Improvement Forum banner

Where to start?

858 Views 5 Replies 4 Participants Last post by  gregzoll
Hi all.

I live in a typical 70s split level walk in the front door steps going to basement steps up to living area. I'm going to install engineered hardwood. I don't know where to start laying it.. A friend says start with the stair nosed piece, Is this right? I was going to start on the longest wall in the livingroom.

Thank's for your help.
1 - 2 of 6 Posts
The first step is sending the family and any pets on a long vacation while you do this project. Figure out the way you want it on the floor. I would use 15# or 30# felt paper on the Basement floor. Now if you have had any issues with water in the Basement, you may want to lay the panels down that allow any water that may get under the floor, to move out of that area.

The biggest issue is staying a proper distance on all four sides for the flooring, especially with it being a Basement area.
Greg, I'm Actually laying it in the living room kitchen and down the hall upstairs. I was just worried when I get to the top step if I;m going to have to rip the stair nose piece to size if so is there a way to do a groove on the stair nose? I would post some pics but i'm out of town for a week.Thanks for every ones advice! :thumbsup:
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.