UV protection for open pore sycamore

821 Views 3 Replies 3 Participants Last post by firehawkmph, Jan 24, 2016

joylove

Discussion Starter · Jan 24, 2016

Hi!

The car has an open pore sycamore dash. As you can see from the picture from another forum member, it starts to degrade. This is entirely by intent by the manufacturer.

However I'd prefer to protect mine from UV and heat and whatnot. I'm aware it won't last forever but I'd like to slow the ravages of time and the sun as much as possible.

What product can I use that won't alter the wood color or the Matt sheen too much?

So far teak oil and Anytime Clean And Polish with UV protection have been suggested. I'm looking for advise from the pros in here.

Thanks!

See less See more

Save

1 - 1 of 4 Posts

firehawkmph

· #4 · Jan 24, 2016

I've had good luck with General Finishes water based finishes. They have an exterior grade finish available in different sheens that has UV inhibitors in it. Doesn't change the color of the wood. It's pretty easy to work with, just follow their directions. The particular product I used was called 450. I get it at the local Woodcraft store. I think Amazon has it also. Just go to General Finishes site and do a little reading. They make high quality finishes. I used this on my white oak Adirondack chairs and a couple of bath vanities.
Mike Hawkins:smile: