DIY Home Improvement Forum banner

Switch/Receptle Combo and Light Feed back to GFCI in bathroom

406 Views 1 Reply 2 Participants Last post by  rjniles
I need to know which wires should be connected to which wires. There is much more detail explain in the attached image. If any information is needed I can provide it if I know what I need to provide.

See less See more
1 - 1 of 2 Posts
Connect all the greens together and to the GFCI. Connect the black/white from the panel to the line side of the GFCI, Connect the white from the light and the switch combo to the load side of the GFCI. Connect the Black from the combo switch to the load side of the GFCI. Connect the black from the light to the red wire.

Merry Christmas
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.