DIY Home Improvement Forum banner

steps for painting pine

2787 Views 5 Replies 4 Participants Last post by  gma2rjc
I built a couple of beams out of 1x8 pine boards that I will be putting in my kitchen. I am going to sand them and fill any knots with wood putty and then plain on painting them an off white color. I have some oil primer and oil paint from sherwin williams that I used on my cabinets that I would like to use on the beams. Is there anything special that I need to do for these pine boards for painting them and getting a good finish? Thanks
1 - 1 of 6 Posts
I would hit the knots once or twice with a spray can of Bin. Then oil prime it.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.