DIY Home Improvement Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
460 Posts
I would build a deck with pressure treated wood (2x6) 12" o/c,. 3/4" exterior plywood. Before starting I would pour a little concrete footing so once the frame was put on it it would be level with the ground and would be sitting on the concrete. Build a deck 12 inches on center and lag bolt it every 12 inches to the shed floot joist so when you put the plywood on it is at your desired level oh yah put some L flashing under the sheds exterior finsh boards to keep water from running in between the plywood and the shed. Tape your plywood seams and prime, then apply some texture tread deck coating.
Of course there are other ways but here is another one to get the ball rolling.
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top