DIY Home Improvement Forum banner
1 - 6 of 6 Posts

·
" Euro " electrician
Joined
·
5,369 Posts
A simple cheap paddle bit will do the same job a whole lot cheaper.
As long you don't hit any nail the cheap paddle bits will work but normally I like to use the augar bits they last super long time and I have nail eater verison which it actually shear off the nails when I bore thru the stud or beams.

Just make sure you bore in the centre of the stud that will work the best.

Majorty of the time the 3/4 or 7/8 inch bit will serve the purpose most of the time but there are couple spots you will have to get larger bit to drill thru for larger cables or conduits.

Merci,
Marc
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top