Ebie,
Screws for fastening cabinets to the walls:
http://www.woodcraft.com/PRODUCT/20...ode=10INGOPB&gclid=CKabs7z9p7UCFQuynQod13gAJA
For fastening faceframe to faceframe:
http://www.woodcraft.com/product/20...ews-flat-head-combo-drive-zinc--500piece.aspx
Faceframes should still be predrilled even though the screws are self drillers. Drill the skinnier hole through the first faceframe and into the second. Drill a bigger hole just through the first faceframe so screw slides through it and bites into the second. I also use a countersink bit to make a slight bevel so the screw head ends up just below flush with the faceframe edge. I also drill a pilot hole just a tag larger than the screws used to fasten the cabinets to the wall.
Mike Hawkins
Screws for fastening cabinets to the walls:
http://www.woodcraft.com/PRODUCT/20...ode=10INGOPB&gclid=CKabs7z9p7UCFQuynQod13gAJA
For fastening faceframe to faceframe:
http://www.woodcraft.com/product/20...ews-flat-head-combo-drive-zinc--500piece.aspx
Faceframes should still be predrilled even though the screws are self drillers. Drill the skinnier hole through the first faceframe and into the second. Drill a bigger hole just through the first faceframe so screw slides through it and bites into the second. I also use a countersink bit to make a slight bevel so the screw head ends up just below flush with the faceframe edge. I also drill a pilot hole just a tag larger than the screws used to fasten the cabinets to the wall.
Mike Hawkins
