DIY Home Improvement Forum banner

rusty table tops

1395 5
My shop is very damp during the spring and this year has been very wet.
My exposed metal on the table saw and joiner are getting rusty.
How to you protect the exposed metal and not raise heck with the
wood when it comes to painting and staining.

Thanks DJ
1 - 1 of 1 Posts

· Registered
Joined
·
584 Posts
My shop is very damp during the spring and this year has been very wet.
My exposed metal on the table saw and joiner are getting rusty.
How to you protect the exposed metal and not raise heck with the
wood when it comes to painting and staining.

Thanks DJ
Get these and your rust problum will be solved. Use Rust Off first. This will remove all the rust and make the table look like new. Now use this with venalation in mind. Smell's. Now after the Rust Off use the T-9 for prevention. This will keep rust from comming back and also the wood will glide like never before. The T-9 will not come off and get into the wood . I been using this combo for a few yrs. no rust. I live in sol florida You can get this in sear's or low's has it . The best. You dont have to do all that sanding ect. Read the direction's will help good luck i use this on anything that has a metal bed on it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top