DIY Home Improvement Forum banner

Replace end-line switch with outlet

1033 Views 3 Replies 3 Participants Last post by  Mike817
I have a double switch in my bathroom that powers my exhaust fan and light. I wanted to replace this box with a double gang and install an outlet In addition to the switch. When I opened up the wall today I saw that there was only a single 12/3 wire going into the box. Can I still convert it into a switch + outlet or does the end line setup only let me have the switch?

Thanks!
1 - 4 of 4 Posts
Unless there's a neutral wire an outlet is not possible.
The receptacle should be on a 20 amp circuit.

If the circuit is shared between other bathrooms it cannot power the receptacle.
Unless there's a neutral wire an outlet is not possible.
That's what I thought. Thanks!
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top