DIY Home Improvement Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
96 Posts
Discussion Starter · #1 ·
Hi
I wanted to start painting my picket fence this year. There is some growth that needs to be removed. What is the recommended method of removing this mold?


Should I pressure wash first which would remove the mold and much of the old paint or scrub with some kind of detergent?
Thanks


Sent from my iPhone using Tapatalk
 

· Registered
Joined
·
1,105 Posts
Hi
I wanted to start painting my picket fence this year. There is some growth that needs to be removed. What is the recommended method of removing this mold?


Should I pressure wash first which would remove the mold and much of the old paint or scrub with some kind of detergent?
Thanks


Sent from my iPhone using Tapatalk
thats not mold its a type of moss( plant like growth)...spray with some bleach to kill it, then pressure wash and paint..
 

· Master General ReEngineer
Joined
·
10,527 Posts
lichen and mold are both FUNGI.

Just on what material they grow on differentiates them.
Ayuh,.... Whatever the stuff is, I use used antifreeze in a garden sprayer to kill the stuff, 'n the rains wash it away,.....

Alittle less harsh than bleach, through I do like beach for alota things,....
 

· Banned
Joined
·
17,162 Posts
That wood is pretty much gone. I wold replace it with a Cedar fence if you still want the same style. If flat, you can just buy the sections. If not even, I would buy the raw Cedar and rent a table saw if you cannot borrow one from a neighbor and get same to help you put up the new one. The plastic looks cheap and does break after a while.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top