Raising incoming powerline coming from utility pole

15909 Views 5 Replies 5 Participants Last post by rrolleston, Jan 25, 2013

ddewitt

Discussion Starter · Jan 25, 2013

I have an issue with a power line (coming from the utility pole to the service header on my house) running uncomfotably close to my rooftop deck. A Com Ed inspector told me that I could install an 11 foot 4x4 post on the corner of my deck with an "insulated bracket" at the top of the post, and then Com Ed could use that post to lift my incoming powerline above to about 10-11 feet above my deck. I have conducted quite a bit of research on my own and by calling various electrical supply houses and another electrician, but I have been unable to determine what type of "insulated bracket" I would need to install on the top of the post. I have spoken to the inspector on multiple occassions, and he is adamant that any electrical supply shop would carry such an "insulated bracket" for about $5.00. Anyone have any thoughts as to the type of "insulated bracket" that might be used for such a project?

Save

1 - 1 of 6 Posts

Speedy Petey

· #4 · Jan 25, 2013

Those in the last two replies. It's called a "one-point rack".

So you are going to raise your utility drop, or what known as the point of attachment. How is the service riser now going to reach? Are you planning on replacing the riser?

Save

Reactions: 1

1 - 1 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month