DIY Home Improvement Forum banner

radiator

726 views 8 replies 3 participants last post by  beenthere 
#1 · (Edited)
I have 5 radiators 4 of them work perfectly and one of them just gets warm but if I turn the other 4 off it goes hot, I have bled the radiator so water is coming out of it but this hasnt solved the problem, any ideas please
 
#2 ·
What is the pressure on the boiler gauge, and is this rad on a higher level then the others. Was the circulator changed out, and then this started to happen?
 
#9 ·
Check the amp draw of the circ while its running, and see if its drawing more then its FLA rating.

Could someone have turned the valve closed tightly, and then reopened it. If so, sometimes the valves don't actually reopen from being over tightened.

Is this a mono flow system, or a 2 pipe system.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top