DIY Home Improvement Forum banner

Question about PVC Wainscoting

6869 Views 4 Replies 4 Participants Last post by  annekreel
I like the look of it and that is rot fee, etc. We would use it for our bathroom.

Question is we don't want to take down the 6x6 tile. Do you think we can put this up over the tile?

Can we use "liquid nails" It says we could for easy installation on their website.

http://www.plastproinc.com/pdfs/Plank_f&B_final.pdf

Also, do you think they make taller sizes?
1 - 5 of 5 Posts
You can buy this in 4' X 8' sheets and yes you can glue it to tile.
You can buy this in 4' X 8' sheets and yes you can glue it to tile.
I can buy it from HD or Lowes in 4x8 sheets and then just cut them down? Will they have the base trim and the chair rail too? Seems like all you have to do basically is glue downt he base board, pop in the wainscoting and then secure at the top with chair rail.

Thanks for your help.
They have 8' planks as well as the standard wainscot length(32" i think?).

Another brand to consider is Azek. Probably won't find it at the box store, usually at a lumber yard.

If you glue it to the tile the top rail will be off the wall by the thickness of the tile and will have to deal with that gap. If the gap is large the box stores usually have some PVC mouldings in different profiles that might help kill out the gap.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top