DIY Home Improvement Forum banner

Problem with extractor fan

4041 Views 8 Replies 4 Participants Last post by  rbha
I have just replaced my extractor fan in the bathroom and have encountered a problem. The extractor fan make/model is, MANROSE - VXF100S BASIC. I have connected it ok (i think) as it is working, however it does not seem to stop. It's connected to the light switch so immediately comes on via light being switched on.

This model does not have a timer. Usually they should stop max 10/15 mins.

Can anyone help?
1 - 2 of 9 Posts
"This model does not have a timer. Usually they should stop max 10/15 mins."

Does it stop when you turn off the light? If not, there must be a timer circuit built into it and it may be defective or you've a model that has a humidistat to control run time to get the humidity in the room to an acceptable level. The model # you provided does not seem to exist on the Manrose website's product listing. There is a LXF 100s that does not have a humidistat. Best check your model #.
RBHA: Are you in the UK? If not, where? Only site I found for this fan was in UK. Wiring here (US) /there is different in some ways.
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top