DIY Home Improvement Forum banner

Painting Shed Exterior Walls Help

567 Views 2 Replies 3 Participants Last post by  lenaitch
I am replacing the lap boards on my shed and considering paint it using a sprayer. The shed is 8x12, 8-12 ft tall. I own a Porter-Cable C2006 Type 3 pancake compressor. The rating of the compressor is 2.6 SCFM @ 90 with a 6 gallon tank.

Are there any spray guns it can work with to spray primer and latex paint?

Any suggestion or recommendations appreciated.
1 - 3 of 3 Posts
You'd get done quicker with a brush and mini roller.
First off that compressor isn't big enough to do much if any spraying, second latex paints don't spray well thru air powered spray guns .... and if you did the paint would have to be thinned way too much.
  • Like
Reactions: 1
Why not stain?
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top