[ryansdiydad]

So I was wrong or maybe I'm just looking for a bit too much perfection but I found so spots that are a bit orange peely on my cabinets sprayed with BM Advance and a Graco Magnum airless sprayed with fine finish tip..

Can you sand the orange peal out like you might with an automotive paint job or would I need to sand and repaint or just live with it.. It may not even be visible at all where the cabinets sit. But knowing its there bothers me a bit...

 

[Jmayspaint]

Advance wet sands really well. Some 400-600 grit wet dry paper and a little water can slick it down amazingly well. You will have to re paint it though.


Sent from my iPhone using Tapatalk

 

[ryansdiydad]

Thanks.. I might leave it.. I doubt anyone but me will notice it..

Do you usually thin advance for your last coat or any coats for that matter? I still need to make and spray the doors..

 

[Jmayspaint]

I never thin it.
Some people like to add a splash of water for brushing it, never seemed necessary to me.

Your orange peel may have been caused by too thin of a coat.


Sent from my iPhone using Tapatalk

 

[ryansdiydad]

time to admit defeat.. so any tips for rolling this stuff? A mohair roller do the trick? Soft blended brush?