DIY Home Improvement Forum banner

OK to convert this receptacle to GFCI receptacle?

862 Views 5 Replies 3 Participants Last post by  Rav
In our kitchen we have a toaster oven which sits on top of a radiator cover, next to the refrigerator. I want to change the receptacle that serves the toaster to be a GFCI receptacle, to make it safer to use. The receptacle is behind the refrigerator, but to the far right, and the frig is 4 inches away from the wall due to the copper water supply line that goes to the ice maker, so I would be able to reach the receptacle without moving the frig in order to test or reset the GFCI. There is a separate receptacle back there that serves the refrigerator, on its own dedicated circuit. The receptacle I want to change is about 9 feet from the sink, which is on the opposite wall. We're on NEC 2008, which doesn't seem to have the "readily accessible" language in section 210.8, so is it OK within the code I'm under to make this a GFCI receptacle? Pics attached. Thanks.


See less See more
1 - 1 of 6 Posts
As long as it is legal by your 2008 code cycle, it just becomes non-conforming but grandfathered, whenever the next code cycle get adopted in you area.

I would to wire it without anything on the load terminals. Although you know it's there, will you or someone else remember that when something else in the house looses power ?

I have a real dislike for hidden GFCIs.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.