DIY Home Improvement Forum banner

Non metallic hydraulic line fittings.

1090 Views 6 Replies 4 Participants Last post by  ChuckTin
My wife has a horse carriage, 2 axles and 4 wheels, that has disk brakes on the rear wheels. The brakes use a "nylon" appearing brake line with fittings I've never seen before and
one of the 90* fittings blew out at the caliper (obviously a good assembly job馃槙) and the brake fluid leaked out.
I'm looking for a source for this kind of fitting and the tool to assemble it.
I can't find anything resembling thIs tubing and fittings through Google. Does anyone know enough about this type of white "nylon" hydraulic tubing to tell me where to get new fittings and the tools to assemble them? Perhaps they are used on motorcycles??
TIA
CVT

Sent from my SAMSUNG-SM-N900A using Tapatalk
1 - 2 of 7 Posts
Do you have a RV repair and parts store locally?

Check online with the manufacturer if this carriage, Maybe at an agriculture/ feed store. Like Tractor Supply.


ED
A link to plastic hydraulic line manufacturer.

http://ccs.infospace.com/ClickHandl...9&mid=9&hash=7FFEBE4020DB1D7F73E01AFFAB4B3740

Also do a search for HARNESS RACING MANUFACTURERS to find a proper master cylinder.


ED
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top