DIY Home Improvement Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
730 Posts
1. For carpet, leave the jambs up 3/8. For laminate use whatever the laminate thickness is. If you don't know, just drop them on to the concrete and cut them off later, if you have the tools.
2. Usually about 5/8 to 3/4 off of finished floor.
3. There is no standard here. Different manufacturers use different numbers. Maybe 6" from top and bottom, center the middle one. Go to a box store and measure them.
4. Not sure on this one. 36" maybe?
5. Sounds a little tight to me. Maybe more like 5/16". Might get away with tighter if the door is beveled slightly.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top