DIY Home Improvement Forum banner

Need to replace heat pump thermostat. Do todays tstats use standard connections?

342 Views 4 Replies 3 Participants Last post by  surferdude2
I have never been able to program a 6 year old Bryant tstat.
I have to set it manually every morning and at bedtime.
When I set the temperature on the tstat the ambient displayed temperature jumps 4 or 5 degrees when I shut the thermostat cover door.

The display also turns blank randomly and resets itself cancelling the program I have set

The Bryant heat pump model number is pictured below as is the existing defective thermostat

Do todays heat pump thermostats use standardized wire connections ??
I want to replace the thermostat with one that will work with the current bryant heat pump and would appreciate advice on what to look for before I buy one. Thanks for your help


See less See more
1 - 1 of 5 Posts
And neither is the thermostat a heat pump type.

Check to see that your problem wasn't from a poor control wire or battery connection or dying battery before assuming it's defective.

Nearly an standard thermostat will replace that one. Choose the one with the features you need but no more than that.

Your Thermostat Info
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.