DIY Home Improvement Forum banner
1 - 6 of 14 Posts

· Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
Hello all,

The previous owners of my house added a den that every HVAC tech said needs to be on its own zone since its next to impossible to run ducts to.

I am ready to install a mini split for this 132 sq. ft. room, I used an online calculator and it says this room needs 6,600 BTUs to cool it down. The lowest single room mini split I can find is 9,000 BTU.

Should I go with the 9,000 btu model?

How about this one: http://www.westsidewholesale.com/ls...a-_-na&cvsfa=1870&cvsfe=2&cvsfhu=383831303730
 

· Registered
Joined
·
56 Posts
Discussion Starter · #3 ·
132 sq ft? Any chance you can put in a regular wall unit? It would be way way WAY cheaper, and do the job just as well. A through the wall unit is basically a window air conditioner with some slight modifications. A room that small just doesn't need a split system.
I have considered shoving a wall unit in there. The wife on the other hand doesn't like "holes" put in her walls.:icon_rolleyes:
It is used as an office where she makes tons on phone calls and wants a quiet system in there.

Crap I for got to add this room has cathedral ceilings and the washer/dryer is in there which makes more noise than she likes and doesn't want to add more.

Hey she's paying for it so....
 

· Registered
Joined
·
56 Posts
Discussion Starter · #5 ·
I understand the reasons as you stated them. The split systems are very quiet. They do require 240V and a seperate disconnect outside. I personally would live with the noise, but keeping her happy may be well worth the added costs with the split system. Does that room require heat as well? Some of those systems have heating capability as well. Good luck with the project.
the room has sufficient heating from baseboard running almost the entire length of the walls (overkill IMO). its not only the quiet she wants. It also the ugly look of a window from the outside.

So how's about that LG unit I linked? Yeah it should be a big learning curve DIY. But I am lucky enough to live across the street from a HVAC contractor and a licensed electrician. Both who will help for the cost of beer.
 

· Registered
Joined
·
56 Posts
Discussion Starter · #10 ·
LGs are good. Try order a full blown troubleshooting and service and parts manual ASAP. Hard to get them a few years down the road and the models change frequently. The owners manual does not have the in depth service info a tech needs.
thanks for the advise.

btw I was just sent this quote of $1265 for a Sanyo single zone 9000btu mini split 16-20 SEER variable speed.

it includes:
shipping
15' interconnecting lineset with UV wiring
service disconnect box and power whip
condensor mounting block risers
wall sleeve
warrantee, tech and installation support

good deal or just wondow dressing?
 
1 - 6 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top