DIY Home Improvement Forum banner
1 - 15 of 15 Posts

· Registered
Joined
·
37,499 Posts
Can not see a crack in that picture.
I do see where there's no foil tape on the joints on the duct work and no insulation on it. That's why it's so warm under there from the wasted heat.
 

· Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
I am not too concerned about the energy waste because the entire house's wood structure both in the crawl space and in the attic (1955 45x35 bungalow) appears to breath well and is in a great shape, no moisture, no darken wood... I guess it's the price to pay to heat a crawl space that is unused otherwise.
 

· Registered User
Joined
·
11,730 Posts
Is it a diagonal crack, directly over the concrete bearing pier? Send the wife down to you with a sandwich and have her hold the light while you take another picture...second thought, let her take the picture...

Gary
 

· Registered
Joined
·
4 Posts
Discussion Starter · #8 ·
You are sharp-tongued fellows. :laughing: The picture was taken by the home inspector, so we are debating now the gravity of the issues, before going back next week-end.

Indeed, what appears to be a crack is a diagonal parallel to the wire. In addition, the supporting pier is also cracked from top left to bottom right, and appears to be missing some concrete on the right side.
 

· Registered
Joined
·
10,393 Posts
Can you build a new pier under the beam (just to the left of the existing pier as shown in the picture)?
 

· Mold!! Let's kill it!
Joined
·
2,849 Posts
Judging from the size of the beam and the location and type of crack, that had to be under an awful lot of stress. Is this a house that you own, or are looking to buy? I would think that in order to break at that point, something else had to settle significantly to place the stress on the beam.
 

· Registered
Joined
·
10,393 Posts
Its the inner part of the pier (in the foreground as shown) that is under added stress (vertical compression), not the beam itself.
 

· Registered
Joined
·
10,393 Posts
How long is the beam span from the spot pictured to the next support which may be a column in the middle of the beam or the pier at the far end of the beam left of what is shown in the picture?

Is there a knot in the wood of the beam at the crack? A knot is a weak spot in a length of wood used as a horizontal support beam.

The more weight on the middle of the beam span, the more compression stress the inner part of the pier (front left as seen) is a taking, and likely yet more stress now that the beam has cracked.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top