DIY Home Improvement Forum banner

Luxury Vinyl Plank, Caulk, Sliding Door

4084 Views 1 Reply 2 Participants Last post by  rjniles
I am in the process of installing 1100 sq ft of luxury vinyl planks. I am floating the floor but have a question about how to finish the floor next to the sliding glass doors. I have three 11ft sliding glass doors. The sliding section is approx 3.75 ft with two fixed sections, one on each side. My question is how should I finish the expansion gap at the door. I was thinking of brown silicone caulk. I also have the option of color matched quarter round. Caulk between floor and jamb and then put quarter round on top. The floor is sold as waterproof so I want to be sure that no water enters the expansion gap at the slider. The planks run parallel to the door as you enter if this makes any difference. Thanks for the help.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.