[Jason7613]

Hey all- looking for advice on securing this Newell post. I have tried driving nails/screws through it to no avail and do not have access to the floor joists underneath. Is it better off replacing the post? Here’s a link to the video and I appreciate all the help.

https://vimeo.com/403848023

 

[ServiceCall]

Do as Chevy Chase did.

 

[ron45]

I would first try some pocket hole screws on the bottom three sides.

If this doesn't secure it tight then add two 1/4 x 7 lag bolts through the bottom front.

Or just do both anyway.

 

[Nealtw]

Shaker hole caps can be found in craft stores and are good for capping hole drilled for adding screws, There is a stud right behind the post in the wall you can screw into and a couple screws into the floor framing below is good.
https://www.woodparts.ca/mushroom-button-wood-plugs.html

 

[ron45]

Shaker hole caps can be found in craft stores and are good for capping hole drilled for adding screws, There is a stud right behind the post in the wall you can screw into and a couple screws into the floor framing below is good.
https://www.woodparts.ca/mushroom-button-wood-plugs.html

That's a good idea Neal.

 

[Jason7613]

Thanks guys - I ended up using a couple pocket hole screws on each side and it seems to have helped.