DIY Home Improvement Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
13,715 Posts
I suspect the air is having difficulty transversing the valve area. The air must have a flow path back to the container via the top of the horizontal section of the pipe and the valve you are using may be restricting that path. You might try a full port ball valve. No guarantees as Ive only built self watering hog water'ers of similar principle.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
I suspect the air is having difficulty transversing the valve area. The air must have a flow path back to the container via the top of the horizontal section of the pipe and the valve you are using may be restricting that path. You might try a full port ball valve. No guarantees as Ive only built self watering hog water'ers of similar principle.
thanks, man i appreciate it!

any other advice would be appreciated guys!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top