DIY Home Improvement Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi There,
We have just installed (okay....we had someone come and install) a drop ceiling in our basement but now we do not know how to go about getting the light fixtures down from the studs they are currently attached to. I want to drop them and then add the fixtures but I'm afraid it will be too heavy. Do I have to get pot lights??? Any help would be GREATLY apprectiated!!!!!
 

· Registered
Joined
·
11,194 Posts
You can get lighting that is made for drop ceilings or you can adapt regular lighting to work in a drop ceiling. What you decide will dictate what you do.
If you drop the lighting into the grid, you will need to add support to the runners to compensate for the added weight.
You can lower a box, to the ceiling plane, but you must support the box as it will carry the weight of the fixture, not the ceiling grid system.
Ron
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top