DIY Home Improvement Forum banner

Leveling site for pre-fab shed

3143 Views 1 Reply 2 Participants Last post by  PaliBob
I need an economical solution to leveling a site for the install of a "Tuff Shed" . My thought was to construct a floor/deck frame using pre-cast piers and 4x4 pressure treated lumber. THe shed comes with a 6 " galvanized joist system and would be set on top (12 x 16 ft hed). Also thought of sing a gravel pad. :(We have a slope that I'll need to compensate for (about 12"). Any input appreciated.
1 - 1 of 2 Posts
I would think that you would want to keep the galvanized joist floor above grade, so that means piers and not gravel. If you bought the Shed locally I would get the local installation advice.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.