DIY Home Improvement Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter · #1 ·
Hi there,

I recently removed a large screened-in back porch. What I've got now is 2/3 of the back of the house that I need to install siding on.

Before I install the siding, it makes sense to put a water barrier on, such as a house wrap. However, this is not "new construction," so the windows and doors are already in place, etc.

Is there a certain technique to follow when installing the water barrier on old construction? Most of what turns up in searches is not applicable to my situation.

Thanks!
 

·
Registered
Joined
·
6,734 Posts
of course you're adding house wrap,,, the technique is tucking the new under the old siding & using const adhesive to seal the jnts,,, tools needed incl putty knife, utility knife, caulking gun, caulk, & :drink: beer :yes:
 

·
Registered User
Joined
·
11,730 Posts
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top