DIY Home Improvement Forum banner

Laminate flooring, strange shaped room, where to place gaps

913 Views 1 Reply 2 Participants Last post by  Ron6519
Hello All,

First time poster. I have come because i need some help with putting the laminate flooring down in my hallway. I have had a crack at it, but I'm concerned as the room is a bit of a strange shape and I'm not sure where I need to leave expansion gaps.

I have uploaded a floor plan as well as 5 pictures to this post, so you can get a good idea of what I have done so far.

So I need to understand where I would leave the expansion gaps for this type of room, and how I would hide them. I'm also trying to understand how to handle the curved section where the stairs meets the laminate, would i be best to use some silicon to connect the two up?

Final element I'm struggling with is getting the laminate to go under doors, most of the youtube videos have shown putting it under a single door, but for the hallway there are 4 doors in total and "sliding" it into position would only work for 1 door. I have 4 doors in this hallway ...

Any and all comments on the best way to do this is very much appreciated.


See less See more
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.