i have a single bowl sink. i had some of that automotive sound deadner, wth is that name of that stuff ? peal and stick. i put that on there after the sink was installed.
made a large difference !!!!!
made a large difference !!!!!
Insulating 2-bowl kitchen sink?
Anybody ever done this? Good idea or waste of time & foam?
From Family Handyman: http://www.familyhandyman.com/plumb...3e7c049850c17996b51b17b4777cd05dda07cf7#step7
Deaden sounds with expanding foam
![]()
Fill the space between two [COLOR=blue !important]stainless steel sink[/COLOR] basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It's possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.
From Family Handyman: http://www.familyhandyman.com/plumb...3e7c049850c17996b51b17b4777cd05dda07cf7#step7
Deaden sounds with expanding foam
Fill the space between two [COLOR=blue !important]stainless steel sink[/COLOR] basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It's possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.
1 - 1 of 4 Posts
1 - 1 of 4 Posts
