DIY Home Improvement Forum banner

Ideas for attaching markerboard to table

1557 Views 6 Replies 3 Participants Last post by  Seattle2k
I'm making a small art table for my daughter. It is only 19" by 39" and I decided instead of using a wood product I would match this table with one her older sister has which is whiteboard marker board material that is 3/16" think, so it's light and strong enough. Now I'm trying to find the best way to attach this to the table top. I have the legs and frame already joined and was thinking either some kind of adhesive or corner molding. The other table has a routed edge on the inside, but then I have to cut this marker board with all the corners. I'm not comfortable enough yet to take that on. Any help I'd greatly appreciate it.
The frame is made up of Select Pine 1x3 and the legs are 2x2 Poplar. I used 2 pocket holes on each 1x3 to join each leg. Feels strong enough. I have pictures, but I don't see a way to post them here.
1 - 3 of 7 Posts
Ok figured out how to upload pictures

I believe this will show it. Seattle2K are you talking about liquid nail or something like that?


See less See more
That's the plan

I have some ribs to go in there. Thanks.
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.