DIY Home Improvement Forum banner
1 - 2 of 2 Posts

·
Civil Engineer
Joined
·
5,832 Posts
Your blade may need to be cleaned. Easiest way to clean is with ammonia, soak the blade and scrub with a nylon brush. If the blade still leaves splinters, it is probably dull. If it is a steel blade, likely not worth sharpening, if carbide it may be worth sharpening.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top