DIY Home Improvement Forum banner

How to clean paint on laminate floor?

11469 Views 9 Replies 9 Participants Last post by  user1007
I have some paint drops on my laminate floor. Is there any products that I can use to clean it up?
1 - 10 of 10 Posts
If it's dried denatured alcohol, or even rubbing alcohol will soften it. Then gently scrape.
I'd save the single malt scotch though. But in a pinch...
Wait until it dries and use a cheap PLASTIC scraper..follow along with a vacuum.
You can apply the stain cleaner on the spots and let it set for one to two minutes.


Yeah Sheridan..that was kind of a dumb comment wasn't it:laughing: What I was thinking was after paint has left small marks and semi dried...best to let it dry and scrape otherwise you just get the dried rings left over.
I will not drink anymore...I will not drink anymore...I will not...AH, forget it:wallbash:

Dave
  • Like
Reactions: 1
Wait until it dries and use a cheap PLASTIC scraper..follow along with a vacuum.
If it is not sharp or thin enough, use plastic razor blades. Usually if the laminate finish is decent it will come off with a wettry terry cloth.

The razor blades will come in handy for other things and they are nice because they do not rust like the steel ones.

http://www.scraperite.com/
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top