DIY Home Improvement Forum banner

Hi/Low/Off Switch for Whole House Fan

7704 Views 7 Replies 5 Participants Last post by  a7ecorsair
I am looking for a wall switch to replace the one lost during remodeling. This is for our whole house attic fan. It looked like a light switch but was metal and had a Hi/Low/Off setting. It is a seperate box from the dial. (the dial does not turn it on or off, we have to have the switch) We have described this to three local hardware stores and our family electrician and no one knows what we are talking about. From searching online, I see these are included when buying the entire whole house fan system, but can not find just the switch. What do I ask for at the hardware store? What will work? Where can I find a replacement switch? (I assume this fan is from the 70s when the house was built)
1 - 8 of 8 Posts
Post the manufacturer of the control box, otherwise check with electrical supply houses, since they should have this part. Granger, Graybar, etc may be able to order. As for loosing the switch, how do you loose it, unless it was removed, and someone tossed into the trash.
Here is one from Selecta Switch:





Download catalog here, this switch is on page 97.
See less See more
Here is one from Selecta Switch:





Download catalog here, this switch is on page 97.
Is a switch with a metal toggle permissible? How would this be grounded if mounted in a plastic box? Is it rated for 120AC?
There is a ground pin on it, and the metal collar also would ground it to the cover.
Here is one from Selecta Switch:





Download catalog here, this switch is on page 97.


But will this switch work as a high and low for the whole house fan?
thanks!
Another year old post resurrected:)
It should work if you have a fan with separate wires for Hi and Low
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top