DIY Home Improvement Forum banner


1463 Views 3 Replies 4 Participants Last post by  Gary in WA
I have a screened in proch I have already added outside walls using t1-14 and a front door how much is it going to cost to finnish, I still need to add a sub floor, drywall and remove the skin from the mobile home where the old front door was and on the same wall remove the windows to make a walk through the room sixe is approx 15 x 20, I only have 800.00 left. will that cover costs for materials? someone please help?
1 - 1 of 4 Posts
You may want to check with your local Building Department. You are adding living space to your mobile home.

Things to consider are: light and ventilation, heating and/or cooling, wiring, footing size for the added weight, safety of the structural framing (tie-in), etc.

You could be in a high wind (Florida, etc. area) or a seismic zone (CA, etc.) that address special concerns.

When you go to sell, you may end up tearing it all out. Be safe, G
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.