DIY Home Improvement Forum banner


831 Views 6 Replies 4 Participants Last post by  panseen
our upstairs floors sag in middle so all bedrooms are raised.would like to lower floors in bedrooms to match hallway. a railway rail is used to hold up upstairs. is there a easy way to do this as we have no money to hire a contractor. how big a job is it ? thanks.
1 - 7 of 7 Posts

· Retired Moderator
25,780 Posts
You need to give us a picture of this one---Using a railroad rail is not exactly standard practic.

Give us something to work with--Mike---

· Registered
11,194 Posts
hi the floors were raised by using 2x4to make each bedroom level. so the front bedroom was flush at one end and then shimmied to make level so is up about 4 in. higher than hallwway floor.
It sounds like you have structural issues way beyond your abiliity to fix or diagnose.
I would bring in contractors to look at the house and give you a proper determination of the problem and possible fixes.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.