DIY Home Improvement Forum banner
1 - 1 of 16 Posts

· Registered
3,859 Posts
Mpoulton: Please explain " You could try installing a valve in the pump outlet line and closing it until the current drops to about 6A."

Why would restricting the outflow of the pump reduce the current draw of the motor? It would seem to me that he may have an oversized pump for the inlet/outlet piping diameter or inadequate pump for the head pressure.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.