[man00]

Will this sprayer spray Kilz without cutting it with thinner or water?

 

[mark sr]

I didn't take the time to look up the specs but I doubt it.




Ok, the specs say 18.6gph which is .31gpm. It's unlikely that would spray unthinned paint. They don't say what size tip it supports.

 

[woodco]

Kilz oil is pretty thin. I think it would shoot it. Those will push standard latex, although not with a big tip. a 413 or so will work.

IDK if that would handle waterborne kilz, or 123, as they are pretty thick.

 

[kt82]

YES IT WILL .I bought mine a year ago and it sprays like a champ with a 5/14 tip

 

[RanK2]

YES IT WILL .I bought mine a year ago and it sprays like a champ with a 5/14 tip

What he said.

 

[RanK2]

Kilz oil is pretty thin. I think it would shoot it. Those will push standard latex, although not with a big tip. a 413 or so will work.

IDK if that would handle waterborne kilz, or 123, as they are pretty thick.

Should handle it. Painted son's whole exterior with that exact unit, brand new. Used a good grade exterior flat. Did have to thin a bit but worked fine.

Tip size wil be biggest factor, my guess is a .15 would be the one. Can't recall what we used but I guess a .17.

 

[woodco]

No way that would handle a .17 .15 TOPS

 

[RanK2]

No way that would handle a .17 .15 TOPS

Probably so, .3 gpm would probably 'squirt' out of a 17.