DIY Home Improvement Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
589 Posts
when possible, you will always get a better fit by connecting the cabinets first, then sliding them into place, imho. it sounds like your are going to be about 6' wide, so what will come into play is the levelness of the floor where they sit, expect to do some shimming under the low end to get everything plumb. then attach through the cleats into studs (as much as possible). use screws meant for cabinet hanging.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top