DIY Home Improvement Forum banner

garage roof done

2129 Views 5 Replies 3 Participants Last post by  wombosi
just wanted to share a few pics.
have no before shots or anything, sorry.

stripped the c himney side completely, lots of rot around the chimney and a few pieces up the rakes where there were overhanging branches. patched in a bunch of new t&g.

grace ice and water around the chimney, about 4 layers.
step flashing all around, then counter flashing chinked into the mortar. this took awhile and was pretty intimidating but i think i pulled it off well (it doesn't leak).
i bent all the copper by hand and with a hammer and various pieces of wood.
i rebuilt the cricket, then covered it with essentially two enormous pieces of step flashing extending up the roof deck.

i think i should probably just shingle over this area...



here she is:




a nice straight ridge:
See less See more
2
1 - 1 of 6 Posts
Very Nice !! :thumbup:

I like the copper look
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top