DIY Home Improvement Forum banner

Fuse box with switch extension

421 Views 2 Replies 3 Participants Last post by  surferdude2

I have this fuse box with switch connecting my roof attic fan. Please see attachment for info.

This fuse box with switch is in my garage and is at height where i have to use ladder to turn it on or off if i want to do it manually. Attic fan is control by thermostat but i want to control it myself rather than turning it on/off automatically. With that said, how can i extend this whole box or just a switch at normal height? As you see in picture, i can't pull the wire which is going in drywall any further down to move that entire box at acceptable height however there is a junction box right below this switch if that can can help you to come up with some idea.

Appreciate all your help.



See less See more
1 - 1 of 3 Posts
Run a romex switch leg from the junction box below to wherever you want the new switch. Wire the switch loop in series with the power leg that feeds the old switch.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.