DIY Home Improvement Forum banner

Floor under retrofitted dishwasher

926 Views 4 Replies 3 Participants Last post by  oh'mike
I have retrofitted a dishwasher in my older home with oak cabinets.
I used a plywood to level the floor. And now the ugly plywood is flush with the ceramic. I thought that the dishwasher's bottom cover would have covered the plywood but I was very wrong. Any ideas of an easy fix. Only thing that I came up with was finishing the plywood best I could and staining it.

See less See more
1 - 1 of 5 Posts
The above solution is a good one.

I suppose a temp solution would be a paint the wood black so it matches the kick plate. It would at least be less noticeable, but probably wouldn't look great.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.