That appears to have a U shaped clip you could remove to remove the washer and escutcheon???
diassambling this faucet
one of my HW sink faucets is leaking.
digging in to see what needs replacing I am stumped at Step 2 - getting access to the guts of the spindle.
the grey plastic piece seems to have flats on it which would suggest that I would use a wrench to unscrew and remove it to pull out the brass post and whatever is below it and has failed. (Cartridge? O-rings? Packing? Rubber washer?)
but it doesn't budge. or at least not without the entire fixture spinning on the sink deck.
does this look familiar to anyone?
many thanks
Peter
digging in to see what needs replacing I am stumped at Step 2 - getting access to the guts of the spindle.
the grey plastic piece seems to have flats on it which would suggest that I would use a wrench to unscrew and remove it to pull out the brass post and whatever is below it and has failed. (Cartridge? O-rings? Packing? Rubber washer?)
but it doesn't budge. or at least not without the entire fixture spinning on the sink deck.
does this look familiar to anyone?
many thanks
Peter
Attachments
1 - 2 of 5 Posts
1 - 2 of 5 Posts
