DIY Home Improvement Forum banner

Dent filling for engineered hardwood flooring

493 Views 3 Replies 4 Participants Last post by  de-nagorg
I recently had some cabinetry put into my home, and the carpenter was a bit lazy with setting his tools down. We now have about 10-15 dings throughout the room from his hammer being tossed down, sitting at about 3/4" long, 1/8" deep. After browsing this forum and several others, I didn't find exactly what I was looking for... I was considering picking up some clear epoxy to fill the dents, then scuff them up with a fine grit sandpaper afterwards (if needed). The color remains within the indentation, so the main goal here is to level these all out without risking messing up the color. Thoughts? Suggestions?

1 - 1 of 4 Posts
Typical fillers won't hold up on dents, I don't know if your clear epoxy plan will work or not but is the only repair I'd even consider. Often it's best to just learn to live with it. Once your focus is on other things it won't look as bad.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.