DIY Home Improvement Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I rent a home that has a Goodman gas furance/AC unit installed. In order to change the filter, I have to unscrew the botttom half of the front of the unit. The wires all hang down and I have to place the 14x25x1 filter inside, under these wires. It always gets stuck and the filter ends up bending. Am I buying the wrong kind of filter? To be honest, I but the cheapest one I can find, usually encased in cardboard. Yes, I shut off the emergency switch first! But I can never get the filter to lay flat where it's supposed to be. Am I doing something wrong? The condensate line for the AC is a real gem too....it's PVC pipe that goes out through the wall. I have to keep a pail under it so it doesn't run down the driveway and pool by the neighbors driveway. Looks like a Rube Goldberg operation to me. The changing of the filter really scares me though.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top